Aluminium PCB V Cutting Machine

Aluminium Led Trip Separator V Cutting Machine With Muli Blades

Specification:

With unique cutting method , the circuit board is cut by six blades . It is a group composed of one upper and one lower blade , and is also a cutting unit. There are A, B, C, three groups.

The whole cutting process is divided into three stages from group A blade which cut 40% board then to the group B blade knife cut through groove cutting by group A to complete another 40% .the last 20% is cut by group C blade and finishing. because each cutting volume is small, the stress produced during the cutting progress declined by more than 80% compared with the traditional cut off at a time.Thus the edge of the board and its surface are very smooth without warping .

Currently, it is the only machine that can guarantee the aluminum plate without deformation after cutting.

Features:

1. this machine applies unique multi sections cutting, the cutting is to be finished by 6 pieces round blade,

2. Working process is pretty smooth, due multi sections cutting

3. there won`t be any deviation when cutting along the v-cut slot, even the v-cut slot is shallow

4. the blade made by high speed steel imported from Sweden, which prolonged the life of the blade

5. precise adjustment of up and down blade.

Competitive advantage:

1. 3 sets of blades share cutting stress to protect pcb from damage,ensure cutting effect.

2. Blade distances could be adjusted by 4 directions(left and right, up and down)

3. with plastic cover in front of blades ensuring safety.