Two Linear Blades Aluminum LED Strip Pcb Depaneling For 0.3-

Aluminum Substrate Substrate Substrate YSVC-3S (LED Lamp Aluminum Substrate Substrate Substrate)

Product characteristics:

1. Using a unique cutting method, the circuit board is cut by six blades. It consists of an upper blade and a lower blade, and is also a cutting unit.

2. There are three groups A, B and C. The whole cutting process is divided into three stages, from group A blade cutting 40% plate to group B blade cutting through group A slotting to complete another 40%. The final 20% cutting C group blades and finishing. Because each cutting volume is very small, the stress generated in the cutting process is reduced by more than 80% compared with the traditional cutting.

Therefore, the edge and surface of the plate are very smooth without warping. At present, it is the only machine that can guarantee the deformability of aluminium sheet after cutting.

3. Because the cutting force of the blade is very small. Abd is made of high-speed steel imported from Sweden. The durability of the blade is greatly improved, and the service life of cutting aluminium sheet can be one year or longer.

4. Because of many times of cutting, the cutting process is very smooth, which greatly improves the position ability of V-CUT slot.

Even if there are shallow V-CUT grooves, the plate will not jump out of the blade to avoid disadvantage.

5. All cutting blades are calibrated by excitation dual-frequency laser interferometer. Ensure that the reamer can accurately continue to cut into the slot that has been cut with the rake. The jitter of the tool tip is less than 0.02mm. Ensure perfect cutting quality.

YSVC-3S Specification

1. Model YSVC-3S with 2.4M platform

2. Size 880 * 420 * 320 mm (L * W * H)

3. machine weight 52kg

4. Voltage 220 V/50 HZ or 110 V

5. Minimum component distance of V-groove is 1 mm

6. Maximum assembly height 20 mm

7. Suitable PCB length is unlimited

8. Cutting thickness 0.6-5.0mm

9. Cutting speed is 300-500 mm/s.