Fully Automatic Solder Paste Printer

Equipment introduction

One. Equipment body
1. Equipment model YS-G5
2. Equipment size 1140 (front length) * 1364 side depth) * 1404 (height) mm
3. Main power supply: AC: 220±10%, 50/60HZ 3KW stable power supply with rated current, plug type: inch. The electrical interface is as shown in the figure above:
4. Main air supply source: a stable industrial air source with a pressure of 4.0~6kgf/cm², the trachea diameter is 6mm/8mm/10mm/12mm, the front joint of the trachea is universal, and the rear joint only needs to match the size of the trachea
5. Machine weight: about 900Kg

Two. Equipment use environment
1. Workshop temperature—20℃~+45℃
2. Workshop humidity 30-60%
3. Electrostatic protection: ESD grounding and electrostatic protection are required
4. If the equipment is not used on the first floor, please pay attention to the heavy load-bearing of the floor, and the load-bearing must be ≥650kg/m²

Machine Performance
Repeat Position Accuracy	±0.01mm
Print Accuracy	±0.025mm
NCP-CT	7.5s
HCP-CT	19s/pcs
Process CT	5min
Transfer line CT	3min
Substrate processing parameter
Max9∶27imum board size	*400340mm Scalable:530340mm(Options)*
Minimum board size	*5050mm**
Board thickness	0.4-6mm
Camera Mechanical range	*528340mm**
Maximum board weight	3kg
Board edge clearance	2.5mm
Board height	15mm
Transport speed	900±40mm
(Max)Transport speed	Segment control 1500mm/s(Max)
Transport direction	One-section transport rail
Transmission direction	Left to right
	Right to Left
	In and out the same
Support System	Magnetic Pin
	Support Block
	Manual Up-down table
Board clamp	Automatic top clamping
	Side clamping
	Adsorption function
Printing Parameters
Print Speed	10~200mm/sec
Print Pressure	0.5~10Kg
Print Mode	Single or double doctor blade printing
Queegee Type	(09/s5/st alfue) apels apels ofoonbs/mand (09/ss/stalle) Chiell/Dievilievi
Snap-off	0~20mm
Snap-Speed	0~20mm/sec
The template frame size	*470370mm~737737mm(Thickness∶20-40mm)*
Steel mesh positioning method	Automatic Y-direction positioning (compatible with manual compensation adjustment)
Cleaning Parameters
Cleaning System	Dry, Wet Vacuum three modes
Cleaning system	Up Drip type
Cleaning stroke	Automatic generation
Cleaning position	Post cleaning
Cleaning Speed	10-200mm/sec
Cleaning fluid consumption	Auto & Manually adjustable
Cleaning paper consumption	Auto & Manually adjustable
Vision Parameters
CCD FOV	*108mm**
Camera type	130 Thousand CCD Digital camera
Camera System	Lock up/down optics structure
Camera Cycle time	300ms
Fiducial mark types	Standard Fiducial Mark Shape
	Round,square,diamond,cross
	Pad and profile
Mark size	0.5-5mm
Mark number	Max:4pcs
Stay away number	Max: 1pcs
Smart equipment
safely control	Door open to stop, abnormal alarm
2D inspection	Detection of less tin/missing print/continuous tin
Automatic crimping	Automatically push up the guide rail
Vacuum adsorption	Platform vacuum adsorption
Machine parameter
Power Source	AC:220±10%,50/60Hz2.2KW
Air Pressure	4~6Kgf/cm²
Air Consumption	About 5L/min
Operating Temperature	-20℃~+45℃
Working environment humidity	30%~60%
Machine dimension (without Tower light)	1404(H)mm
Machine Length	1140(L)mm
Machine Width	1364(W)mm
Machine Weight Approx	Approx∶About900Kg
Equipment load bearing requirements	650Kg/㎡

[Back]

Feedback

Name:
Phone:
Fax:
E-mail:
Country:
Company:
*Country/Region:	*
Feedback: