Split Selective Wave Soldering Machine YS-320S

Solve the difficulties in DIP welding

1.Solve the flexible production of multiple varieties and small batches (flexible and convenient)

2.Quick online welding, no fixtures required (direct welding can be done with a safe distance)

3.Extremely low equipment purchase cost (low initial investment cost)

4.Extremely low usage and maintenance costs (saving tin slag, flux, electricity and consumables)

5.The tin penetration rate is 100% and the welding yield rate is over 98%

6.Extremely low floor area (about 1 square meter)

Selective wave soldering working mode

During offline selective welding,the welding nozzle is fixed.

The PCB board is set according to the program.

Move in the X,Y, and Z axes to achieve the soldering of PCB solder joints.

Specification items

Specification items	Split selective wave soldering YS-320S
Applicable PCB board size	L*W : 50×50~320×250 mm
Applicable PCB board thickness	Substrate thickness:0.8~3 mm / Pin length:Within 3mm
Component height	On the substrate Less than 100mm / Less than 30mm below the substrate
Substrate shape and conditions	1.Substrate placement edge:The edge of the substrate process is more than 3mm 2.The weight including components is less than 5 kilograms 3.The bending of the substrate: less than 0.5mm
Tin furnace	Tin furnace material/capacity: All-titanium alloy material / 12KG Tin bath capacity: Power: 4*500W, 2KW
Preheating power	Infrared preheating 1KW
Total power	AC 220V 3.5KW
N2 Requirements	Nitrogen purity:99.999% Pressure/Consumption :0.5MPa / 20/min~30/min / 1.2 cubic meters
Nozzle inner diameter	φ 3mm~φ 20mm Customizable size
Peak height	Automatic alignment/automatic height measurement
System control	PC+PLC(windows+Siemens)
Programming software	Support offline image production programming
Power supply/power	Single-phase 220V±10 Starting power:3.5KW
Weight	100KG (Containing solder12KG)
External dimensions	LWH 750×820×1350 mm (It does not include three-color lights)

Feedback