1.Cleaning area: The cleaning storage tank is used to recover and store the cleaning solution, and to conduct three-stage filtration, heating and monitoring, as well
as liquid level monitoring on the cleaning solution.
2.Pre-cleaning water pump: 1.1KW (1 unit), cleaning water pump: 5.5KW (2 units);
3.Storage tank volume: ≤ 270L (1 unit)
4.Filtration device: Pre-cleaned filter elements 0.45UM(5 pieces), cleaning 1 and cleaning 2 each filter element 0.45UM(5 pieces), stainless steel filter screens
1.5mm (3 pieces); Heating power: 18KW (2 items), heating temperature: Room temperature -100℃ (adjustable);
5.Liquid level protection: low level, medium level, stop level, over-limit level.
6.Spray pressure: 0.1-0.7Mpa (adjustable)
7.Rinsing area: The rinsing water storage tank is used to recover the stored water, and the rinsing water is subjected to overflow filtration + open-loop final spray,
heating and monitoring, as well as liquid level monitoring.
8.Pre-rinse water pump: 1.1KW (1 unit), rinse water pump 1:3KW (1 unit), rinse water pump 2:1.1KW (1 unit);
9.Pre-rinse water storage tank volume: ≤ 27L (1 unit) Rinse 1 water storage tank capacity: ≤ 72L (1 unit); Rinse 2. The volume of the final spray water tank: ≤
55L (1 unit);
10.Pre-rinse water tank heating power: 9KW (1 piece); Rinsing 1 water tank heating power: 18KW (2 items); Rinsing 2. Final spray water tank heating power:
9KW (1 piece) Heating temperature: Room temperature -45℃ (adjustable)
11.Filtration device: Overflow filtration, stainless steel filter screen 0.5mm (1 piece);
12.Liquid level protection: low level, medium level, stop level, over-limit level.
Pre-rinse, rinse 1, rinse 2 spray pressure: 0.1-0.6Mpa (adjustable), final spray: Spray pressure: 0.1-0.3Mpa (adjustable)
13.Drying area: The drying section is used to thoroughly dry the products and conduct hot air circulation + heating and temperature monitoring for the air.
14.Hot air fan: 1.5KW (1 piece), finned heating tube: 15KW (6 pieces of 2500W), heating temperature: Room temperature -95℃ (adjustable);
15.Mesh belt running device: The running device is composed of a reduction motor, stainless steel mesh belt, frequency converter, etc. The motor drives the
mesh belt to run smoothly.
16.Motor power: 90W (1 set), frequency converter: 200W(1 unit), encoder 1 unit;
Features
1. Fully automatic cleaning mode
2.Full-process visualization
3.Scientific nozzle design (patent)
4.Scientific nozzle design (patent)
5.Comprehensive cleaning system
6.Body material: The entire body is made of stainless steel, resistant to acidic, alkaline and other cleaning solutions.
