Machine Description：
YS-5200 SMT Fixture Cleaning Machine is used to clean grease, Flux, rosin on the surface of all kinds of SMT parts ,such as composite stone Fixture，Tray, Reflow oven cooler and Filter; Wave-soldering oven claw，Chains, and Nets…etc. SME-5200 consists of Wash system, Resin system, Rotary cleaning basket, Dry system and Control system. Put the dirt SMT fixtures on to the cleaning basket, setting the cleaning parameters, the machine wash, resin and dry them automatically by pushing start key.
Machine Character：
1. Total SUS 304 structure, resist Acid and Alkali corrosion, 10 years lifespan.
2. PLC procedure control, Touch-panel operation，world class reliable electric parts.
3. Easy One-button operation, high pressure clean+ rinse+ hot air dry, all process complete in a cycle automatically.
4. Clean solution heat and keep temperature function
5. Closed-loop clean and rinse, clean solvent and rinse water are cycling filtered in the machine.
6. Solution use repeatedly and make it cost down
7. The fixtures are clean and dry after cleaning, standby and ready for use at any time.
8. Standard equipped solution and water auto fill-in and pipe-out function.
9. Labor cost save, clean efficiency raise.
机器规格 Machine Spec： ItemModel Number | YS-5200 |
Clean fixture size | Φ1000mm x H 400mm |
Spray system |
All-round rotate spray clean and rinse
|
3-level Filter system |
1mm/50um/20um
|
Clean tank capacity | 80L |
Rinse tank capacity | 80L |
Spray pressure | 3~6 KG |
Air supply | 0.5~0.7Mpa |
Power supply | AC 380V,19KW, 3 Phase |
Machine dimension | L2100 x W1380 x H 1400 (mm) |
Machine weight | 560kg |
Governance of the furnace cleaned before and after comparison:
