BCM Press Fit through hole component pin Insertion Machine

Function：

This equipment is used for inserting the single circled linear hardware piece to the electronic circuit board(PCB) automatically,precisely and effectively through the inserting head after cutting them into single bulk end automatically and making them adhesive strength.Specification:Overall dimension:2250*1300*1600mmWeight:1000KGAir: 6+/-0.5kg/cm2 air consumption: 656N/minPower:AC220V,single-phase50/60HZ,1.4KWNoise:80dBOperating enviroment5-40Humidity:10-90%RH(it can be used as long as there are no crystal beads in the air)Requirements for the surrounding environment:no corrossive gasMovement dimension of the workbench:X680mm, Y370mm,Multi-direction X580mm,Y370mm Bilatery.Movement speed of workbench:22.5m/minPCB electric circuit board:500*350MaxInserting direction: 0, 90, 180,270 degrees or multi-angle.Plugging speed:110PCS/minExternal communication function: by RS-485 interface.Installation time of electric circuit board:4sComponent inserted:hardware piece of electric circuit boardQuantity of inserting heads:1-3(based as required)Hole correction mode:By the angle system of the machineComputer control system:Intel Corei3 CPU Windows operation systemDisplay system:17inch color LCDFedding system:rolling feeding system.